Yearly Archives: 2014

Windows 8 and Microsoft VPN problems

Today i have the problem where a Windows 8 machine, won’t connect to Microsoft VPN server.

The problems was that MSChapV2 was disabled on the client.
Please find this under Security and Allowed these protocols.

The error message I got from both the VPN servers and the client was:

Server:
The following error occurred in the Point to Point Protocol module on port: VPN2-9, UserName: XXXXX\XX. The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.

Client:
Error 815: The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.

Please see more here: http://jermsmit.com/windows-8-vpn-error-812/

Uninstall all updates installed on a specific day

Get the list of the update

wmic qfe get hotfixid,installedon | findstr MM/DD/YYYY > c:\list.txt

 

  1. Open C:\list.txt in Notepad.
  2. Go to Edit > Replace and set the following field values:
    Find what: KB
    Replace with: Leave the line empty
  3. Go to Edit > Replace and set the following field values:
    Find what: MM/DD/YYYY
    Replace with: Leave the line empty
  4. Generate this uninstall script:

for /f %i in (‘type c:\list.txt’) do echo wusa /uninstall /kb:%i >> c:\uninstall.list

Open uninstal.list  run each line by itselft.

 

 

Error while Installing the Client Agent on Ubuntu and Debian Linux – unexpected operator

Errors like this:

/opt/CA/ABuagent/uagentsetup: 74: [: -e: unexpected operator
/opt/CA/ABcmagt/caagent: 60: cd: can’t cd to /nls
/opt/CA/ABcmagt/caagent: 60: cd: can’t cd to /nls
/opt/CA/ABcmagt/caagent: 60: cd: can’t cd to /nls
/opt/CA/ABcmagt/aglang_setup: 60: [: -e: unexpected operator
/opt/CA/ABcmagt/caagentsetup: 54: [: -e: unexpected operator

While installing CA Arcserve R16.5, can be resolve by changing /bin/sh linking from dash to bash.

You can check the linking of /bin/sh, with this commands:

ls –l /bin/sh

If you get:

lrwxrwxrwx 1 root root 4 Feb  7 19:41 /bin/sh -> dash

You have this problem.
Change the linking is easy, just reconfigure dash

dpkg-reconfigure dash

Select No, to Install dash as /bin/sh

Once this is changed you should be able to install the agent or start the agent fine.

 

 

 

 

CA ArcServe16.5 under Debian X64bit

  1. First install 32bit libs.
    apt-get install g++-multilib
  2. Then get the DEB’s files, from the cdrom
    mount /dev/cdrom /mnt
    cd /mnt/datamoverandagent/linux
    dpkg -i *.deb

    If you get errors like this: /opt/CA/ABcmagt/aglang_setup: 60: [: -e: unexpected operator.
    See here: http://kennethdalbjerg.dk/2014/04/07/error-while-installing-the-client-agent-on-ubuntu-and-debian-linux-unexpected-operator

  3. Run these commands
    /opt/CA/ABcmagt/caagentsetup
    /opt/CA/ABcmagt/caagent_autostrtstop
  4. Run this command to start R16.5 CA Agent.
    /etc/init.d/bab_agent start